142 lines
3.1 KiB
C
142 lines
3.1 KiB
C
//
|
|
// Created by william on 12/30/23.
|
|
//
|
|
|
|
#include <stdbool.h>
|
|
#include <stddef.h>
|
|
#include "types.h"
|
|
|
|
#ifndef NESEMULATOR_PPU_H
|
|
#define NESEMULATOR_PPU_H
|
|
|
|
#define PPU_REGISTER_SIZE 0x8
|
|
#define PPU_VRAM_SIZE 0x4000
|
|
#define PPU_OAM_SIZE 0xff
|
|
#define PPU_RAM_BASE_ADDR 0x2000
|
|
#define PPU_RAM_MAX_ADDR 0x4000
|
|
#define PPU_RAM_BANK_SIZE 0x8
|
|
#define PPU_RAM_BANK_COUNT ((PPU_RAM_MAX_ADDR - PPU_RAM_BASE_ADDR) / PPU_RAM_BANK_SIZE)
|
|
|
|
#define PPU_REGISTER_CTRL 0x00
|
|
#define PPU_REGISTER_MASK 0x01
|
|
#define PPU_REGISTER_STATUS 0x02
|
|
#define PPU_REGISTER_OAM_ADDR 0x03
|
|
#define PPU_REGISTER_OAM_DATA 0x04
|
|
#define PPU_REGISTER_SCROLL 0x05
|
|
#define PPU_REGISTER_ADDR 0x06
|
|
#define PPU_REGISTER_DATA 0x07
|
|
|
|
#define PPU_CTRL_SCROLL_X 0x1
|
|
#define PPU_CTRL_SCROLL_Y 0x2
|
|
#define PPU_CTRL_BASE_NAMETABLE_ADDR 0x3
|
|
#define PPU_CTRL_VRAM_ADDR_INCREMENT 0x4
|
|
#define PPU_CTRL_SP_PATTERN_TABLE_ADDR 0x8
|
|
#define PPU_CTRL_BG_PATTERN_TABLE_ADDR 0x10
|
|
#define PPU_CTRL_SP_SIZE 0x20
|
|
#define PPU_CTRL_MODE_SELECT 0x40
|
|
#define PPU_CTRL_GEN_VBLANK_NMI 0x80
|
|
|
|
#define PPU_MASK_GREYSCALE 0x1
|
|
#define PPU_MASK_SHOW_BG_LEFT 0x2
|
|
#define PPU_MASK_SHOW_SP_LEFT 0x4
|
|
#define PPU_MASK_SHOW_BG 0x8
|
|
#define PPU_MASK_SHOW_SP 0x10
|
|
#define PPU_MASK_EMP_RED 0x20
|
|
#define PPU_MASK_EMP_GREEN 0x40
|
|
#define PPU_MASK_EMP_BLUE 0x80
|
|
|
|
#define PPU_STATUS_OPEN_BUS 0x1f
|
|
#define PPU_STATUS_SP_OVERFLOW 0x20
|
|
#define PPU_STATUS_SP_0_HIT 0x40
|
|
#define PPU_STATUS_VBLANK 0x80
|
|
|
|
#define PPU_MASK_NONE 0xff
|
|
|
|
#define PATTERN_TABLE_BYTES_SIZE 0x1000
|
|
#define NAMETABLE_BYTES_SIZE 0x0400
|
|
#define PALETTE_TABLE_BYTES_SIZE 0x0020
|
|
|
|
typedef struct ppu_memory {
|
|
byte nametable_0[NAMETABLE_BYTES_SIZE];
|
|
byte nametable_1[NAMETABLE_BYTES_SIZE];
|
|
byte palette[PALETTE_TABLE_BYTES_SIZE];
|
|
} PPUMemory;
|
|
|
|
typedef struct ppu_tile_fetch {
|
|
byte tile_id;
|
|
byte attribute_table;
|
|
byte pattern_table_tile_low;
|
|
byte pattern_table_tile_high;
|
|
} PPUTileFetch;
|
|
|
|
typedef union {
|
|
struct {
|
|
byte tile_debugger: 1;
|
|
byte tile_debugger_pattern_half: 2;
|
|
} flags;
|
|
byte flags_byte;
|
|
} PPUDebugFlags;
|
|
|
|
typedef struct ppu {
|
|
PPUMemory memory;
|
|
pixel pixels[256 * 240];
|
|
|
|
byte registers[8];
|
|
byte oam_dma_register;
|
|
byte oam[PPU_OAM_SIZE];
|
|
bool odd_frame;
|
|
byte x_scroll;
|
|
byte fine_x_scroll;
|
|
byte y_scroll;
|
|
byte x;
|
|
bool w;
|
|
|
|
byte ppu_addr_increment;
|
|
address ppu_address;
|
|
address temp_ppu_addr;
|
|
address bg_pattern_table_addr;
|
|
|
|
PPUTileFetch fetch;
|
|
unsigned long frame;
|
|
unsigned int scanline;
|
|
unsigned int cycle;
|
|
|
|
PPUDebugFlags debug;
|
|
} PPU;
|
|
|
|
PPU *ppu_get_state();
|
|
|
|
/**
|
|
* Initializes the PPU, according to the power up state.
|
|
* https://www.nesdev.org/wiki/PPU_power_up_state
|
|
*
|
|
* @param ppu
|
|
*/
|
|
void ppu_init();
|
|
|
|
/**
|
|
* Cycles the PPU.
|
|
*
|
|
* @param ppu
|
|
* @param ram
|
|
*/
|
|
void ppu_cycle();
|
|
|
|
/**
|
|
* Read a flag from the PPU registers.
|
|
*
|
|
* @param reg The register index
|
|
* @param mask The flag mask
|
|
*/
|
|
bool ppu_read_flag(size_t reg, byte mask);
|
|
|
|
byte ppu_read_reg(byte reg);
|
|
|
|
void ppu_write_reg(byte reg, byte data);
|
|
|
|
void ppu_write_oamaddr(byte data);
|
|
|
|
void ppu_write(address addr, byte data);
|
|
|
|
#endif //NESEMULATOR_PPU_H
|